Cougar is normally a reputation that I might affiliate with budget-friendly PC {hardware}. Not essentially unhealthy, as I’ve reviewed a number of Cougar circumstances and coolers earlier than which were low-cost however executed the job, nonetheless I wouldn’t usually anticipate an excessive amount of. Immediately I’ve a brand new Cougar MX600 ATX case to evaluate that on the floor appears strange, but it surely has some options that would make it extremely popular. The query is, is it nonetheless good worth for cash? Let’s discover out.
Watch the video through our VIMEO Channel (Beneath) or over on YouTube at 2160p HERE
Timestamps:
When information got here in that I had a brand new mid-tower chassis from Cougar to evaluate, I used to be initially a little bit sceptical and thought it was simply going to be one other generic chassis with a flowery entrance panel and a few ARGB lighting. Nonetheless, as quickly as I took the Cougar MX600 out of the field I used to be immediately as there have been some very noticeable options that caught my consideration, such because the aspect PSU vents, the sq. mesh perforations and an built-in GPU help bracket that was seen by way of the aspect window.
After trying on the case and the spec sheet a little bit nearer and studying that the case supported a number of 360mm radiators, modular panels in addition to different options I might usually anticipate from extra premium manufacturers I began to marvel how this may very well be doable from a model which might usually be classed as finances – is Cougar attempting to develop into extra upmarket? Properly, if the value of the MX600 is something to go by then I don’t assume so, as it’s going to value simply $119 U.S. or £129 which as of late isn’t costly for a case with these options.
Cougar MX600 Options:
- A number of vented panels create omnidirectional air flow for max airflow – Mesh panels are fitted to the entrance, proper and left-hand sides and the rear of the case for a really open-style excessive ariflow design.
- Positioned behind the underside entrance fan mount is an inner air scoop in entrance of the PSU shroud to information airflow to warmth crucial elements, such because the graphics card and the motherboard chipset.
- A 110mm tall energy provide shroud aspect vent is built-in into the chassis to advertise air consumption and assist system cooling.
- 3 x 140mm front-mounted ARGB PWM followers and a single 120mm ARGB PWM rear fan are pre-installed to the chassis. The case contains an ARGB and PWM fan hub with six ports.
- The entrance followers will be put in while not having to take away the entrance panel, alternatively, the entrance fan/radiator bracket is detachable through a tool-free answer.
- Full tower capability in a mid-tower profile – the Cougar MX600 helps EATX motherboards with eight PCIe slots and as much as 400mm lengthy graphics playing cards.
- Equipment bundled with the case embrace a vertical GPU mounting bracket (No riser cable included) and a field of screws, cable clips and some white zip ties.
Specs:
- Case Sort: Mid-Tower
- Dimensions:235 x 515 x 478 (mm)
- Color: Black / White
- Materials: Metal, Plastic, Tempered Glass
- Motherboard Assist: Mini ITX / Micro ATX / ATX / CEB / E-ATX
- Growth Slots:8
- Storage:4 x 2.5″ SSD max, 1 x 3.5″ HDD max
- Max GPU Size:400mm
- Max CPU Cooler Peak:180mm
- Max PSU Size: 180mm
- Fan Assist:3 x 120/140mm (Entrance) 3 x 120/140mm (High) 2 x 120mm (PSU Shroud) 1 x 120/140mm (Rear)
- Pre-installed followers – 3 x 140mm ARGB PWM (entrance) 1 x 120mm ARGB PWM (rear)
- Radiator Assist:360/280mm Max (Entrance) 360/280mm Max (High) 120/140mm (Rear)
- I/O Ports: 1 x Energy Button, 1 x Reset/ARGB Button, 2 x USB 3.0 Sort-A, 1 x USB Gen2 Sort-C, 1 x 3.5mm Combo Audio
- Mud Filters: High / Entrance / Backside / Proper / Left
Thermal Efficiency Testing
To simulate thermal demand we run the Cinebench R23 multi-thread benchmark and 3DMark Velocity Means stress take a look at concurrently in a loop for 60 minutes to totally load the system. This provides the CPU and GPU sufficient time to achieve fixed steady-state temperature. With this knowledge, we are able to examine how the system handles the thermal demand and measure peak noise ranges.
Thermal efficiency is measured with the case in varied configurations, such because the default, with the tempered glass left-hand aspect panel eliminated and with the entrance panel eliminated to see how these configurations have an effect on the CPU and GPU temperature. Throughout testing, solely inventory case followers are used until in any other case specified. All water pumps are set to most RPM and followers are set to a customized RPM curve by the Motherboard software program/BIOS.
All temperature measurements are offered as Deltas – which means the ambient temperature has been deducted from the CPU temperature giving us a Delta. Information proven within the charts signify the common element temperature over the size of the take a look at as measured by HWiNFO after which the final quarter-hour of the info are calculated to get the common. The ambient temperature throughout thermal exams is between 19-21⁰C.
Take a look at System Specification:
Thermal Efficiency/Noise Overview:
Thermal Efficiency:
With the MX600 in both configuration, thermal efficiency may be very constant. The good CPU and GPU temperatures ware with the left-hand panels eliminated which is frequent typically that we take a look at. Including a few followers to the highest of the PSU shroud dropped GPU temperature by a few levels however working the case within the default configuration additionally produced glorious thermals with a median CPU delta temperature of 48°C which is great for this {hardware}.
Noise:
Noise ranges inform us the complete story although, the system ran at its lowest noise stage underneath load with the left-hand aspect panel eliminated, because the graphics card didn’t have to ramp up the fan RPM a lot to maintain the GPU core cool, however with the case within the default configuration plus PSU shroud followers the height noise stage was solely 1dBA increased as once more the graphics card fan RPM was capable of keep low to maintain the GPU cool. Eradicating the PSU shroud followers created a little bit extra noise from the graphics card followers working at a barely increased RPM however due to the spectacular thermals in any configuration noise output is constant and never too distracting.
Closing Ideas
Initially, I used to be stunned to see the lengths that Cougar had gone to with the MX600somewhat than simply utilizing a generic inner chassis that we now have seen time and time once more. Nonetheless, after constructing a system within the MX600 and testing the thermal efficiency I can safely say that Cougar has ripped up the rule e-book that finances manufacturers normally observe and created a genuinely sensible mid-tower chassis. For me, the appears, thermals, {hardware} help and premium options such because the modular panels and high-spec cooling help make it an all-round winner.
Nonetheless, as all the time nothing is ideal, there are a few minor niggles with the case. The construct high quality of the entrance mesh panel is doubtful, there’s far an excessive amount of flex and wobble in it whenever you press on it, this might have simply been remedied by including central clips or a magnetic answer to carry the center of the panel firmly. Additionally, the built-in GPU anti-sag help didn’t work with the Gigabyte 7900XT Gaming OC graphics card that we used within the construct, so a minor redesign on that may be good.
There’s a lot to love concerning the case although, as we noticed throughout our thermal efficiency exams the case can maintain high-end elements cool in any configuration. Including followers to the highest of the facility provide helps but it surely’s not important because the open and extremely ventilated fashion of the case works effectively with simply the inventory followers within the inventory positions, however with a graphics card that in any other case runs fairly sizzling, it may be worthwhile including PSU shroud followers to help with GPU cooling.
Different options such because the detachable prime panel are very worthy design options. It is good to have a detachable prime panel when putting in a top-mounted radiator or followers and it could possibly additionally come in useful if you happen to neglect to attach up cables on the prime of the motherboard such because the EPS or fan headers prior to installing a radiator up prime. However there may be nonetheless an inexpensive quantity of area between the motherboard and the highest of the case even when a roof-mounted radiator is put in, which is sweet.
A query I get requested so much is that if a case will help twin 360mm radiators put in within the entrance and prime concurrently. With the MX600 that is doable, I examined two EK-Quantum Floor S360 30mm thick radiators, one within the roof and one within the entrance of the case with 25mm followers in place and so they match comfortably which is good news for customized water cooling fanatics. I used to be additionally capable of squeeze in a 420mm radiator (with the air scoop eliminated) or 420 AIO on the entrance of the case though it is not formally supported.
Cable administration may be very straightforward within the Cougar MX600 too, the case has loads of cable cutouts positioned the place you’d anticipate (not all with rubber grommets) in addition to cable administration channels and straps on the again of the motherboard tray which are available in very helpful. I normally measure how good a case is at cable administration by what number of further zip ties or straps I want to make use of to make the cabling look tidy, with the MX600 it was only one in order that is a wonderful consequence, higher than some dearer premium circumstances.
The case additionally comes with three front-mounted 140mm ARGB PWM followers and a 120mm ARGB PWM fan within the rear, in addition to a six-port ARGB / PWM hub to manage ARGB both through the highest reset button (that may be re-purposed for RGB management) or through the motherboard software program when linked to a motherboard 3-pin 5v ARGB header. Controlling the ARGB lighting through both technique is easy and the consequences are advantageous, there may be some gentle bleed on the fan LEDs however the lighting is fairly effectively subtle.
With all the things thought of, the Cougar MX600 is a wonderful mid-tower chassis. It’s able to nice thermal efficiency, has premium options you’d usually discover in dearer circumstances, the color shades of white panels correspond effectively between completely different supplies, {hardware} and cooling help is excessive finish, it’s out there in black or white color schemes and the included followers and ARGB hub are helpful for individuals who aren’t too fussy about which model of followers they use, so priced at $119 USD or £129 it’s a discount and one I might use in a future construct with out having to assume twice.
The Cougar MX600 might be out there to pre-order from CHILD (hyperlink is coming quickly) in both black or white priced at £129.99.
Execs:
- A number of vented panels present nice airflow and thermal efficiency.
- Convertible prime creates extra entry.
- Spacious Inside is simple to construct with.
- White panels are the identical shade in several supplies
- Simultaneous set up of a number of 360mm radiators.
- A beneficiant quantity of ARGB followers are included for the fee.
- Good cable administration options.
Cons:
- Entrance panel flex is a nasty design.
- GPU help bracket isn’t appropriate with all graphics playing cards.
KitGuru says: You will not go far flawed if you happen to spend your money on this case, There’s some stiff competitors at this worth level however the Cougar MX600 is up there with a few of the greatest.
Turn into a Patron!
You should definitely take a look at our sponsors retailer EKWB right here
