LCD screens on circumstances and coolers have turn into ever extra fashionable lately, however the MSI MEG Prospect 700R has probably the most feature-rich LCD display screen that I’ve seen so far. The MEG Prospect 700R is a big mid-tower ATX chassis with sufficient area to accommodate the most recent graphics playing cards, EATX motherboards and in depth cooling choices. Its outfitted with a front-mounted 4.3-inch touchscreen LCD panel that may show system info, management fan velocity, regulate RGB lighting results and integrations with MSI Centre… However does all this high-tech gadgetry make it a very good case? Let’s have a look.
Timestamps:
00:00 Begin
00:56 It’s how a lot?
01:54 Touchscreen LCD panel
02:51 Quite a lot of options
04:20 Entrance panel I/O
04:54 Analysing the case – deep dive
09:30 {Hardware} help (GPU/CPU)
09:54 PCIe / Vertical GPU mount (provided)
10:12 PSU shroud / color matching
11:20 Rear panel and spacing
12:36 Behind the tray
13:45 Storage help
14:57 Backside of the case
15:48 {Hardware} for the construct
18:12 System construct – Timelapse
24:14 James ideas on the construct course of
26:57 Thermal and Noise Efficiency
28:24 Closing Ideas – Professionals and Cons
LCD screens have gotten very fashionable on PC circumstances today. Similar to AIOs clad with LCD shows, each vendor now needs a chassis with a display screen. Most producers have utilised the LCD display screen as a technique to show system info and permit customers to personalise the system with customized photographs and animated GIFs. MSI has taken that one step additional by introducing the MEG Prospect 700R with a 4.3-inch touchscreen show that has many helpful features.
In addition to with the ability to show system information, customized photographs and GIFs, the touchscreen show on the Prospect 700R can be utilized to manage fan velocity, regulate ARGB lighting results with just a few faucets on the display screen, it could actually additionally combine with MSI Centre to show climate studies and extra. Management may be utterly handed to MSI Centre or the motherboard too. This revolutionary design implies that the value of the case isn’t low cost however when you have a wholesome funds and need this characteristic it may be yours for round £350.
Options:
- The entrance of the case is supplied with a 4.3-inch touchscreen LCD panel that may management fan velocity and ARGB lighting results in addition to show system info, climate studies and extra. The panel may also be synchronised with MSI Centre or motherboards to manage options.
- Geared up with 4 pre-installed 140mm MSI ARGB followers for optimum cooling and vivid lighting results. Fan velocity and ARGB lighting may be managed by the touchscreen LCD show or synchronised with MSI Centre.
- A modular inside permits customers to change the system in line with their particular wants. The facet mount panel may be swapped from the default cable administration panel to a fan/rad mount panel mount or an adaptor plate for giant EATX format motherboard set up.
- A spacious inside helps as much as EATX motherboards, giant graphics playing cards as much as 400mm lengthy, tall CPU coolers and massive energy provides. Devoted cable routing channels and hinged facet panels present nice accessibility for set up.
- Magnetic mud filters are positioned on the highest, entrance, facet and backside panels of the case to minimise undesirable mud build-up.
- Intensive cooling choices embody a number of giant radiator installations, help for as much as ten 120mm followers, optimised airflow by way of ventilated panels and an EK distro plate that may be bought individually is accessible for customized cooling lovers.
- Entrance I/O connectivity options two USB 3.2 Gen 1 Sort-A ports, a single USB 3.2 Gen2 Sort-C port, 2 x 3.5mm audio jacks in addition to energy and reset buttons.
MSI MEG Prospect 700R Specs:
- Case Type Issue: Mid-Tower
- Supported Motherboards: EATX (as much as 310mmx304.8mm) / ATX / M-ATX / ITX
- Entrance I/O Ports: 2x USB 3.2 Gen 1 Sort-A, 1x USB 3.2 Gen 2×2 Sort-C, 1x HD Audio, 1x Mic
- Storage Drive Help: 2x 2.5″, 2x 2.5″/3.5″
- Enlargement Slots: 7
- Most GPU Size: 400mm
- Most CPU Cooler Top: 185mm
- Supported Energy Provide: Normal ATX, max as much as 220mm (with out 3.5” HDD tray put in)
- Supported Followers: 3x120mm/3×140 mm (Entrance), 3×12 mm/3x140mm (Prime), 1x120mm/1x140mm (Rear), 3x120mm (Aspect)
- Pre-Put in Followers: 3x140mm ARGB (Entrance), 1x140mm ARGB (Aspect)
- Radiator Help: 120/140/240/280/360mm (Entrance), 120/140/240/280/360mm (Prime), 120/140mm (Rear), 120/240/360mm (facet)
- Dimensions (DXWXH): 585 x 257 x 537mm
- Web Weight: 15.95 kg
- Observe: Materials – Left Aspect: Tempered Glass/ Proper Aspect- Steel, Vertical GPU Mount – Sure, Contact Panel – Sure
Thermal Efficiency Testing
To simulate thermal demand we run the Cinebench R23 multi-thread benchmark and 3DMark Velocity Approach stress check concurrently in a loop for 60 minutes to completely load the system. This offers the CPU and GPU sufficient time to achieve fixed steady-state temperature. With this information, we are able to examine how the system handles the thermal demand and measure peak noise ranges.
Thermal efficiency is measured with the case in varied configurations, such because the default, with the tempered glass left-hand facet panel eliminated and with the entrance panel eliminated to see how these configurations have an effect on the CPU and GPU temperature. Throughout testing, solely inventory case followers are used until in any other case specified. All water pumps are set to most RPM and followers are set to a customized RPM curve by the Motherboard software program/BIOS.
All temperature measurements are offered as Deltas – that means the ambient temperature has been deducted from the CPU temperature giving us a Delta. Information proven within the charts symbolize the typical element temperature over the size of the check as measured by HWiNFO after which the final quarter-hour of the information are calculated to get the typical. The ambient temperature throughout thermal assessments is between 19-21⁰C.
Check System Specification:
Thermal Efficiency/Noise Overview:
Thermal Efficiency:
With the system underneath full load, the MSI MEG Prospect 700R copes properly with thermal demand. 77 °C delta is regular for the Core i9-13900K CPU and the GPU temperature at 42°C delta is nice for the RTX 4080, which suggests the airflow is working properly via the case.
Eradicating the facet panel didn’t have a lot of an affect on both the CPU or GPU temperature however eradicating the highest and entrance mesh dropped CPU temperature by just a few levels. Nonetheless this was most definitely as a result of removing of the highest mud filter which may be restrictive and isn’t wanted when working the radiator on the high with followers set as exhaust. General thermal efficiency is sweet in both state of affairs.
Noise:
With a CPU temperature of roughly 100°C throughout stress testing the CPU followers will probably be working at 100% RPM, which suggests with this CPU cooler noise output is excessive. With the case within the default configuration and all panels put in, noise output was measured at 51dBA max. However with the system idle and working the case followers at 40% responsibility cycle, which was round 800RPM, the system could be very quiet so it will not be distracting in any respect throughout gentle load duties.
Closing Ideas
In case you want a mid-tower chassis with loads of area for a high-end construct with an enormous graphics card and room for highly effective cooling then the MSI MEG Prospect 700R has this in abundance. We discovered that constructing a system contained in the case was a breeze… apart from when it got here to testing out the vertical GPU mount, our RTX 4080 simply didn’t appear to suit irrespective of how onerous we tried. In case you favor to mount the graphics card horizontally then this may not be an issue.
By way of construct high quality, there aren’t any main complaints right here both, only a few minor niggles. The case feels very sturdy, the metal that the primary chassis body is constructed from is thick and the powder coating end is of a excessive commonplace. There’s a slight mismatch of black shades between metallic and plastic elements however that is fairly widespread in circumstances which can be assembled with totally different supplies, however on a case on this value vary you’ll anticipate this to be excellent.
Airflow and cooling efficiency have been very sturdy throughout our testing and the included MSI 140mm ARGB followers are quiet and supply good airflow via the chassis. Setting the fan velocity by way of the touchscreen panel to 40% responsibility cycle meant the followers ran at round 800 RPM which is sufficient to create first rate airflow and operation is nearly silent. Thermal efficiency is great too, the mesh entrance and high panels work properly and preserve our high-end check system cool.
In case you spec your system with the best {hardware} and cooling tools it is best to be capable to arrange a high-end system that runs cool and quiet. The shortage of 420mm radiator help is a bit disappointing particularly when it’s fairly a big mid-tower case, another similar-sized chassis help 420mm radiators and the necessity for greater cooling is extra related than ever with high-end CPUs consuming a lot energy.
There are lots of good issues concerning the MSI MEG Prospect 700R such because the construct high quality, cooling efficiency, {hardware} help and the modular panel design that enables customers to configure the chassis to their particular wants, however there are some negatives too. As already talked about we struggled to suit the RTX 4080 vertically with the included mount, and the brushed aluminium panels on the doorways are fingerprint magnets. Perhaps another materials would have been a more sensible choice since these panels are technically used as handles to open the doorways.
The MSI Centre software program is required to make use of sure options of the touchscreen LCD panel, and whereas this isn’t a significant challenge, the software program may be temperamental at instances, for example at one level I misplaced all connectivity to the AIO. The AIO display screen simply immediately vanished from the MSI Centre menu which meant I misplaced all management of fan velocity and many others. A fast restart of the system mounted it however it’s irritating when issues like this occur.
Nonetheless, the primary downside with the case is the value. In case you take the touchscreen out of the equation then the remainder of the case options are just like one thing just like the Corsair 5000D Airflow or Fractal Meshify 2, each of that are priced at round £150. So MSI is successfully asking a £200 premium for the LCD display screen which, whereas a nifty inclusion, does appears a bit a lot. The display screen does supply some helpful options however I’m not positive it is value paying this a lot to have it.
The MSI MEG Prospect 700R is accessible to pre-order now from CHILDREN priced at £349.99 HERE.
Professionals:
- Good area to construct high-end programs.
- System set up is straightforward.
- LCD touchscreen panel has helpful options.
- Modular design is sweet for varied eventualities.
Cons:
- The worth could be very excessive.
- Vertical GPU mount compatibility is restricted.
- MSI Centre software program is required for some LCD features.
KitGuru says: The MSI MEG Prospect 700R’s most important characteristic is the 4.3-inch touchscreen LCD panel which presents some actually helpful features and is a wonderful manner of utilising an LCD display screen on a chassis, however is it actually definitely worth the £200 premium that MSI has hooked up to it?
Turn out to be a Patron!
Be sure you take a look at our sponsors retailer EKWB right here
