Close Menu
  • Graphic cards
  • Laptops
  • Monitors
  • Motherboard
  • Processors
  • Smartphones
  • Smartwatches
  • Solid state drives
Facebook X (Twitter) Instagram
Facebook X (Twitter) Instagram
Dutchieetech
Subscribe Now
  • Graphic cards
  • Laptops
  • Monitors
  • Motherboard
  • Processors
  • Smartphones
  • Smartwatches
  • Solid state drives
Dutchieetech
Solid state drives

Easy methods to improve the SSD within the Lenovo Legion Go

dutchieetech.comBy dutchieetech.com11 December 2023No Comments4 Mins Read

You probably have a Lenovo Legion Go otherwise you’re pondering of selecting one up, then you definately’ve in all probability been contemplating easy methods to get probably the most quantity of storage. There’s an official 1TB choice that is not too costly, however if you wish to lower your expenses now and get the 512GB mannequin, otherwise you need greater than 1TB of storage, you’ll be able to improve it your self.



As a result of the Legion Go makes use of a 2242 M.2 SSD, you will want a few issues to get began, and your alternative SSD will should be the fitting dimension, so any of the others for the Asus ROG Ally or different Steam Deck alternate options will not suffice.


What you could learn about changing the Legion Go’s SSD

For those who’re changing the SSD within the Legion Go, you will want the next:

  • A brand new alternative SSD
  • A PH00 screwdriver and a PH0 screwdriver
  • A plastic spudger to separate the backplate
  • An SSD enclosure to clone the drive

For the SSD enclosure, we advocate getting two of them should you can, as you’ll be able to then use a instrument like Macrium Mirror to clone from the outdated drive to the brand new one. From there, you’ll be able to allow it to increase the drive dimension to fill the whole SSD, and when it finishes, you’ll be able to simply put it in your Legion Go and boot it up as regular.

Step 1: Flip off the Legion Go, take away the controllers and the backplate

To begin off, you will have to do the next to switch your SSD within the Legion Go:

  1. Energy off the Lenovo Legion Go.
  2. Flip the gadget onto its entrance and take away the controllers.
  3. Elevate the kickstand to reveal the world beneath.
  4. Unscrew the again screws utilizing your PH00 screwdriver.
  5. Use your plastic separating instrument to get between the plastic backplate and the shell of the Lenovo Legion Go, beginning on the lip of the backplate beneath the place the kickstand is.

When eradicating the backplate, watch out, as there are a whole lot of plastic clips that maintain it to the remainder of the gadget. We advocate separating it from the left or the fitting of the lip of the backplate beneath the place the kickstand was. Be sluggish and cautious when eradicating it, and you have to be good to go.

Step 2: Elevate the tape and disconnect the battery

Battery connector on the Lenovo Legion Go

You will subsequent have to carry the tape protecting the battery connector on the right-hand facet of the Lenovo Legion Go. Take away it by pulling it downwards away from the connector.

Step 3: Elevate the tape protecting the SSD and unscrew it

Lenovo Legion Go SSD still in device but with tape removed

As soon as the battery is disconnected (it does not should be pulled far-off to be disconnected), you’ll be able to take away the SSD.

  1. Take away the black tape protecting the SSD.
  2. Unscrew the SSD from the gadget utilizing your PH0 screwdriver.
  3. Wiggle the SSD out from the connector, conserving the metallic foil intact.

As soon as disconnected, you’ll be able to then copy your knowledge over utilizing Macrium Mirror or some other software program of your alternative.

Step 4: As soon as your knowledge is copied, put the SSD again in and put the Legion Return collectively

Lenovo Legion Go SSD removed from device with foil over it

Now you can put the SSD again in, ensuring to place the metallic foil that was on the outdated SSD over the brand new one. This foil is to stop electrical interference.

  1. Wrap the foil across the new SSD.
  2. Plug the SSD again in and screw it again in place.
  3. Plug the battery again in.
  4. Put the backplate again on, making certain all clips are in place.
  5. Screw it again in place.
  6. Activate the Lenovo Legion Go.

If all goes effectively, you will have a brand new SSD put in and dealing in your Lenovo Legion Go!

What to do together with your Lenovo Legion Go now

With the cash that you’ve got saved from upgrading the SSD your self, you should use that to purchase your self a brand new case and even choose up some extra video games! The SSD alternative within the Lenovo Legion Go is among the more durable ones to switch within the present set of gaming handhelds, however it’s nonetheless completely doable by anybody who has the fitting instruments and a while.

Source link

dutchieetech.com
  • Website

Related Posts

SSD Controllers Market Set for Outstanding Progress: Detailed

21 June 2024

Gujarat Authorities’s New Curriculum Faces Backlash for Non secular Imbalance

21 June 2024

This huge 4TB Samsung 870 EVO SATA SSD is £195 from Amazon with a code

21 June 2024

Teamgroup Unveils Newest Gen5 SSDs, Cooling Options For SSDs In Air, Liquid & Vapor Chamber Design, New Xtreem DDR5 & CAMM2 Reminiscence

6 June 2024

Sabrent Apex X16 Rocket 5 Destroyer Examined with 64TB Gen5 SSD

6 June 2024

Considerably Enhancing Each Laptop computer and SSD Efficiency

4 June 2024
Leave A Reply Cancel Reply

You must be logged in to post a comment.

Legal Pages
  • Disclaimer
  • Privacy Policy
  • About Us
  • Contact Us

Type above and press Enter to search. Press Esc to cancel.